Use this Toyota Land Cruiser 2008–2018 fuse guide to find the cabin fuse box, identify numbered positions and check the rating for a socket, wiper, lamp or control circuit. Select a fuse in the diagram, or search by the label printed on the cover.
Check your version. J200 passenger-compartment box 1, on the left. The right-side cabin box and the engine-bay boxes have their own numbering. Under-hood layouts differ for 2008–2013 and 2014–2018.
Fuse box locations
Interior box 1 is beneath the left side of the dashboard; box 2 is beneath the right side. There are separate engine-bay layouts for 2008–2013 and 2014–2018.
Cabin fuse box diagram — left-hand box
Tap a position, hover over it or use the keyboard to see its label, rating and main circuit. The diagram keeps the numbered arrangement; fuse sizes are simplified.
On smaller screens, swipe the diagram sideways to see every position. Unnumbered striped spaces are not assigned here; a dash means no rating is specified. Read the printed rating, not colour alone.
Select a fuse
Use the numbered diagram or the table below.
No matching circuit. Try the label printed on your fuse cover.
Open the cabin fuse table
Where a position appears twice, the rows describe different versions. Main circuits are summarised; the vehicle’s own legend and manual take priority.
| Position | Label | Rating | Main circuit / version |
|---|---|---|---|
| CIG | 15 A | Lighter socket | |
| BK/UP LP | 10 A | Reverse / trailer lamps | |
| ACC | 7.5 A | Accessory electronics | |
| PANEL | 10 A | Switch illumination | |
| ECU-IG NO.2 | 10 A | Body / stability controls | |
| WINCH | 5 A | Unused circuit | |
| A/C IG | 10 A | Climate / demister controls | |
| TAIL | 15 A | Position / rear lamps | |
| WIPER | 30 A | Front wipers | |
| WSH | 20 A | Screen washer | |
| RR WIPER | 15 A | Rear wiper / washer | |
| 4WD | 20 A | Four-wheel drive | |
| LH-IG | 5 A | Ignition-fed equipment | |
| ECU-IG NO.1 | 5 A | Body / stability controls | |
| S/ROOF | 25 A | Sunroof | |
| RR DOOR RH | 20 A | Rear-right window | |
| MIR | 15 A | Mirror controls / heaters | |
| RR DOOR LH | 20 A | Rear-left window | |
| FR DOOR LH | 20 A | Front-left window | |
| FR DOOR RH | 20 A | Front-right window | |
| RR FOG | 7.5 A | Unused circuit | |
| A/C | 7.5 A | Climate controls | |
| AM1 | 5 A | Unused circuit | |
| TI&TE | 15 A | Steering-column adjustment | |
| FR P/SEAT RH | 30 A | Right powered seat | |
| PWR OUTLET | 15 A | Accessory socket | |
| OBD | 7.5 A | Diagnostic connector | |
| PSB | 30 A | Pre-collision seat belts | |
| DOOR NO.1 | 25 A | Body electronics | |
| FR P/SEAT LH | 30 A | Left powered seat | |
| INVERTER | 15 A | Inverter circuit |
Common checks for the Land Cruiser
Box 1 contains CIG at position 1 and PWR OUTLET at position 26, both 15 A. Identify the box first: a position number from the right-hand panel refers to a different circuit.
What do the fuse labels mean?
OBD identifies the diagnostic connector; P/OUTLET and CIG relate to accessory sockets. WIP/WIPER is a wiper circuit and WASH/WSH a washer circuit. STOP relates to brake lamps, while TAIL covers position or rear lamps. ECU labels feed control electronics and can supply several systems. LH/RH mean left/right; FR/RR mean front/rear. Read them in the context of the full label.
How should I check or replace a fuse?
- Park safely, switch the ignition and affected equipment off, and identify the correct box and cover label.
- Remove the fuse with a suitable puller. Check the element; continuity testing of the removed fuse can confirm a break that is difficult to see.
- Fit the same fuse type and the exact rating specified for your vehicle. Never bridge the terminals or increase the rating.
- Refit the cover and test the circuit. If the new fuse blows, stop replacing it and investigate the overload or short circuit.
Airbag circuits, high-current links and hybrid high-voltage components need the relevant service procedure. Do not probe or bypass them as part of a routine fuse check.
The fuse is good, but the equipment still does not work. What next?
A sound fuse does not confirm that power reaches the component. Check the required ignition setting and whether other equipment on the same supply works. A damaged socket, connector, earth connection, switch or relay may be responsible. Use the correct wiring diagram and a circuit test before replacing parts.
Related Toyota information
Toyota Land Cruiser model page · Browse Toyota models and fuse guides